Used with Sash Hinge FL.SE
- Profile-dependent, see synoptical table in chapter 1
- Groove centre position 13 mm
- Pressure adjustment: +/- 0.8 mm
- Max. sash weight (without Sash Hinge Rail FLS.SE): 100 kg
- Max. opening angle 95°
- All screws in the rear layer (axis 23.5 mm from the window
frame inner edge) must be screwed into position on the
frame steel reinforcement.
- See Group 15, Installation Drawings B-6-1 and B-6-2 for
drilling templates
- Required airgap at horizontal bottom side 12+ 1 mm
